|
|
|
無標題文件
The Dragon Load K62R1 is equipped with large cooling fans, with low RPM, which still provide enough air flow to cool down the hardware adequately. The front 140mm intakes red LED fan runs . The top two silent 140mm fans exhaust the hot air out, and the rear 120mm red LED fan extracts the hot air out. |
 |
 |
The fans on the top panel are mounted with Lian Li’s new anti-vibration fan mounting system; the rubber ring grommet absorbs the vibration, keeping the case silent.
|
The new 5.25” bay tool-less mounting incorporates a mounting bar equipped with rubber padding. After secure the mounting bar, the rubber pad pushes and holds the 5.25” device in position to secure and absorb vibration from the device. |
 |
 |
The too-less HDD cage combines with patented anti-vibration rubber grommets to suspend the HDD’s in a noise free environment. The two buckls on both side to hold the HDD in position, also absorb and reduce vibrations.
|
The aluminum PCI tool-less mounting module is equipped with a rubber pad which can hold the graphics card firmly while closing the gap found in the PCI bracket and PCI slot to reduce noise from escaping air and furthermore reduce vibrations. |
 |
 |
The Power Supply has rubber pads for both insulation and support. The mounting clip is also aligned with rubber to reduce vibrations but also and also secure the PSU without scratching the painted surface.
|
There are special air intake vents at the front of the case, allow cold air to enter , also keep system noise inside the case.
|
 |
 |
There are four rubber grommets between the HDD cage and HDD, avoid HDD directly contact the HDD cage, absorb and reduce vibrations, keep the noise down.
|
|
|
|
|
